Units And Signal Cables; Inserting Units In The Subrack - ABB FOX615 Installation & User Manual

I N S T A L L A T I O N P R O C E D U R E S
3.9.3

Units and signal cables

3.9.3.1

Inserting units in the subrack

NOTICE
76
Normally the FOX615 subrack is delivered without units. The units are sepa-
rately shipped. For commissioning or replacement you must insert units into
the FOX subrack. Carefully read the instructions below before you insert
units into the subrack.
Electrostatic discharges. Risk of equipment damage!
Units are sensitive to electrostatic discharges!
→ Use a grounded protective wristband when handling units!
→ Keep the units in their ESD protective plastic bags until you use the
units!

FOX615 Installation