Table of Contents
Advertisement
2
Preparing for installation
2.1
Installation general instructions
2.1.1
Selection of the installation site
NOTICE
NOTICE
NOTICE
FOX615
Installation
To get the best performance and MTTF with your FOX equipment you
should consider the following aspects for the selection of the installation site:
Please note:
Avoid sites with important differences between the daily maximum and the
nightly minimum temperature (except for cabinets with air conditioning).
→ For FOX615 installed in cabinets or similar, select sites for the cabi-
nets which are not permanently exposed to direct sun radiation.
Please note:
Operation at lower temperatures extends the long-term reliability (MTTF) and
the lifetime of the equipment.
→ Check for temperature and relative humidity within the specified
range.
Attention to temperature range!
Attention to temperature range. Risk of equipment damage!
High ambient temperatures caused by other equipment may lead to over-
heating of the FOX615 and may cause damage to the FOX615.
→ Do not install the FOX615 near or on top of equipment that dissipates
heat.
Attention to temperature range. Risk of equipment damage!
Attention to temperature range!
Obstructed airflow may lead to overheating and damage of your FOX615.
→ Make sure that the selected installation allows the equipment to dissi-
pate the heat created within the FOX615.
Attention to access control. Risk of equipment damage!
Unrestricted access to equipment premises hold a risk of damaged equip-
ment and disrupted services.
→ Select a dust-free room that is normally closed and not generally
accessible.
P R E P A R I N G F O R I N S T A L L A T I O N
11
Hide quick links:
Advertisement
Table of Contents
