Alarm Interfaces; Interfaces And Connectors; Figure 37: Famo1 And Famo1-F Alarm Interfaces; Figure 38: Molex Connector Frames And Crimp Terminals - ABB FOX615 Installation & User Manual

I N S T A L L A T I O N P R O C E D U R E S
3.7.3

Alarm interfaces

3.7.3.1

Interfaces and connectors

66
The FOX alarm interfaces are physically all implemented on the FAMO1 or
FAMO1-F unit. The individual input and output interfaces are arranged in
groups with a connector per group.
50
m ov ing fa ns
re fe r to ha ndbook

Figure 37: FAMO1 and FAMO1-F alarm interfaces

All alarm interfaces use Molex connectors. To avoid wrong connections con-
nectors with different number of contacts are implemented for each interface
type.
For all connections between FOX equipment cables are provided. Connector
sets are provided for interfaces which are user configurable (alarm inter-
faces). The sets contain the Molex connector frame and crimp terminals.
P
S

Figure 38: Molex connector frames and crimp terminals

Legend:
1 Molex connector frame
2 Mini-Fit HCS
3 Wire (AWG 18 ... 24)
S Inserting the Mini-Fit HCS
frame
P Plugging the connector frame into the FAMO1 or FAMO1-F
interface
The crimp terminals (2) accept wires as follows:
F2 F3 F4 F5
fa n 4 8 VDC 1 9 " 1 U R2 A
3 7 9 7 0 0 0 3 2 1 1 1 7 4 3 4 7 3
2 0 1 1 W 4 4
F 2 : Ala rm output F 3 : Ala rm inputs
1 -2 1 -4
1
2
TM
crimp terminal (AWG 18 ... AWG 24)
TM
crimp terminal into the connector
F4 : Ala rm inputs F 5 : Ala rm inputs
5 -8 9 -1 2
3

FOX615 Installation