protocols ripng log
Enables logging for RIPng.
Syntax
set protocols ripng log { all | events| nsm | packet| rib}
delete protocols ripng log { all | events| nsm| packet | rib}
show protocols ripng log { all | events| nsm | packet| rib}
Command Default
None
Parameters
all
Enables all RIPng logs.
events
Enables RIPng events logs.
nsm
Enables RIPng NSM logs.
packet
Enables RIPng packet logs.
rib
Enables RIPng RIB logs.
Modes
Configuration mode
Configuration Statement
protocols {
ripng {
}
}
Usage Guidelines
Use the set form of this command to enable routing information protocol (RIP)ng logs.
Use the delete form of this command to remove RIPng logs.
Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1
53-1004512-01
log {
all
events
nsm
packet
rib
}
Router-level Configuration Commands
27