VRF Support
[routing routing-instance <instance_name>] protocols ripng log ...
The rib and nsm logging options are global options and apply to all routing instances. The rib and nsm logging options cannot be
enabled or disabled on a routing-instance basis. The following commands apply to all routing instances.
monitor protocol rip ... nsm
monitor protocol rip ... rib
protocols rip log nsm
protocols rip log rib
monitor protocol ripng ... nsm
monitor protocol ripng ... rib
protocols ripng log nsm
protocols ripng log rib
The output of the following commands displays routing-instance information, if relevant.
show monitoring protocols rip
show monitoring protocols ripng
Command support for VRF routing instances
VRF allows a Brocade 5600 vRouter to support multiple routing tables, one for each VRF routing instance. Some commands in this
guide support VRF and can be applied to particular routing instances.
Use the guidelines in this section to determine correct syntax when adding VRF routing instances to commands. For more information
Brocade 5600 vRouter Basic Routing Reference Guide . This guide includes an overview of VRF, VRF configuration
about VRF, refer to
examples, information about VRF-specific features, and a list of commands that support VRF routing instances.
Adding a VRF routing instance to a Configuration mode command
For most Configuration mode commands, specify the VRF routing instance at the beginning of a command. Add the appropriate VRF
keywords and variable to follow the initial action (set, show, or delete) and before the other keywords and variables in the command.
Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1
62
53-1004512-01