Reset Ipv6 Ripng Route - Brocade Communications Systems 5600 Configuration Manual

reset ipv6 ripng route

Resets data in the RIPng routing table.
Syntax
reset ipv6 ripng route [ all | bgp | connected | kernel | ospfv6 | ripng | static |
Parameters
all
Removes all entries from the RIPng routing table.
bgp
Removes only BGP routes from the RIPng routing table.
connected
Removes entries for connected routes from the RIPng routing table.
kernel
Removes kernel entries from the RIPng routing table.
ospfv6
Removes only OSPFv6 routes from the RIPng routing table.
ripng
Removes only RIPng routes from the RIPng routing table.
static
Removes static entries from the RIPng routing table.
ip-address
Removes entries that match
Modes
Operational mode.
Usage Guidelines
Use the reset ipv6 ripng route all command to clear the RIPng routing table.
Brocade 5600 vRouterRIPng Configuration Guide, 5.0R1
53-1004512-01
ip-address ( x:x::x:x/M ), a destination IPv6 address, from the RIPng routing table.
Router-level Configuration Commands
ip-address ]
35