Table of Contents
Advertisement
Palm rest
Description
Palm rest (includes TouchPad)
Before removing the palm rest, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the switch cover (see
6.
Remove the keyboard (see
Remove the palm rest:
1.
Position the computer right-side up with the front toward you.
2.
Remove the three PM2.5×3.0 screws (1) that secure the palm rest to the computer.
3.
Slide the palm rest to the right (2), and then turn it over from the front edge (3) until it rests
upside down on the top cover.
4.
Release the TouchPad cable connector (1), and then remove the TouchPad cable (2) from the
system board.
48
Chapter 4 Removal and replacement procedures
Battery on page
36).
Switch cover on page
Keyboard on page
39).
37).
Spare part number
599551-001
Advertisement
Table of Contents
