Numerical Parameter (Int). Represents Numerical Value; Enumerated Parameter (Enum) - DEVA Broadcast DB9009-RX Maintenance And Operation Instruction Manual

There is several parameter types available in DB9009-RX. The way of editing depends of that
type. Following is description of parameter types. Every parameter has several properties, change
step, unit, default value, permitted range for its value and so on.

Numerical parameter (INT). Represents numerical value.

Example:
Button assignments for INT in edit mode:
[OK] – Accept the value and exits edit mode.
[UP]/[DOWN] – Changes the value of the parameter with one step increment/decrement. The
value always stays in permitted parameter range.
[SB4] – Discards the value and cancels edit mode.

Enumerated parameter (ENUM).

Represent selection of one value from set of predefined enumerated values. Example: The value
can be changed between "Enable" and "Disable" position. Button assignments for ENUM in edit
mode:
[OK] – Accept the value and exits edit mode.
[UP]/[Down] – Cycles through possible value positions. The value always stays in permitted
parameter range.
[SB4] – Discards the value and cancels edit mode.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 31 -