Panasonic FP2 Technical Manual page 21

FP2 Multi-wire Link Unit
. Notes
D (*1): Because polyvinyl chloride has poorer electrical character-
D (*2): If products with the order numbers listed below are in-
D (*3): If transmission is adversely affected by noise in the envi-
istics than polyethylene, the overall transmission distance
is shorter.
cluded in the network when the F mode is used, the maxi-
mum transmission distance is the distance noted in paren-
theses. Information on the various types of commercially
available manifold solenoid valves should be confirmed
with the manufacturing company.
Product name
12 V DC type I/O terminal board
24 V DC type I/O terminal board
FP3 remote I/O slave unit
FP5 remote I/O slave unit
Manifold solenoid valve
ronment, shielded twisted pair cables should be used.
General Specifications
1.2 Specifications
Order number
AFP87441
AFP87442
AFP3741
AFP5741
—————
1 - 13