Accessing the storage devices
You can access the following storage devices:
Internal memory of the projector
External storage devices connected to the projector, such as a ThinkPad
Stack 1TB USB3.0 Hard Drive or a Universal Serial Bus (USB) storage
device
Sharing the phone or computer screen with the projector
You can share the phone or computer screen with the projector through a wired
or wireless connection.
For wireless connection, ensure that your phone or computer is equipped with
the following function:
Phone: Cast screen or similar function
Computer: Intel
Windows 8.1, or Windows 10 operating system
Sharing the phone screen
Wireless connection
1.
Projector: Enable Wi-Fi from the Settings page. Enable Cast screen
from the Home page.
2.
Phone: Enable Wi-Fi and Cast screen. Then follow the screen
instructions to connect the phone with the projector through Cast
screen.
Sharing the computer screen
Wired connection
1.
Connect the computer with the projector through the HDMI cable.
2.
Set the projector in the HDMI in mode.
Wireless connection
1.
Projector: Enable Wi-Fi from the Settings page. Enable Cast screen
from the Home page.
2.
Computer: Enable Wi-Fi and press Windows+K. Then follow the
screen instruction to connect the computer with the projector
through Cast screen.
Sharing the projector screen with an external monitor
Ensure that the external monitor has an available HDMI connector. Then you can
share the projector screen with the external monitor by doing the following:
®
Wireless Display (Intel WiDi) on the Windows 8,
8