Lubrication Points And Type Of Lubricant; Tightening Torque - Hitachi G 18ST Service Manual

(6) Mount the cord clip as shown in Fig. 9 being careful of the direction.
Fig. 9 • Cord clip mounting diagram
Cord dia.: Over 8.4 mm

Lubrication points and type of lubricant

Pinion chamber of the Gear Cover Ass'y [4] -------- 50 g of COSMO DYNAMAX EP No. 1
Tapping Screws D4 x 16 [35] [38] ---------------------------- 2.0 ± 0.5 N•m (20 ± 5 kgf•cm, 1.5 ± 0.4 ft-lbs.)
Tapping Screw D5 x 35 [1] ------------------------------------- 3.4 ± 0.7 N•m (35 ± 7 kgf•cm, 2.5 ± 0.5 ft-lbs.)
Bolt M5 x 16 [23] -------------------------------------------------- 7.8 ± 1.5 N•m (80 ± 15 kgf•cm, 5.8 ± 1.1 ft-lbs.)
Special Nut M10 [6] ---------------------------------------------- 20.4 ± 3.1 N•m (200 ± 30 kgf•cm, 14.4 ± 2.2 ft-lbs.)
Machine Screw M5 x 10 [16] ----------------------------------- 5.9 ± 1.5 N•m (60 ± 15 kgf•cm, 4.3 ± 1.1 ft-lbs.)
Generously rub grease onto the gear, pinion and
inner circumference of the metal.

Tightening torque

-6-
Cord dia.: Max. 8.4 mm