Clock Functions; Using The Accessories - Zanussi ZOG10311XK User Manual

Knob for the gas control
Symbol
Ignition of oven gas burner
Oven safety device:
The gas oven has a thermocouple. It
stops the gas flow if the flame goes
out.
1. Press the knob for the gas control and turn
it to .
2. Keep the knob for the gas control pushed
for 15 seconds or less to let the
thermocouple warm up. If not, the gas flow
is interrupted.
Do not release the knob until the flame
comes on.
Do not keep the knob for the oven
functions pushed for more than 15
seconds. If the oven burner does not
light after 15 seconds, release the
knob for the oven functions, turn it
into off position, open the oven door
and try to light the oven burner again
after minimum 1 minute.
After igniting the oven gas burner
1. Release the knob for the gas control.

Clock functions

Minute Minder
Use it to set a countdown time for an oven
function.
This function has no effect on the
operation of the appliance.

Using the accessories

WARNING!
Refer to Safety chapters.
www.zanussi.com
Heat only from the bottom of the oven. Range of temperature adjustment (150 °C -
250 °C).
Heats from the top.
Function
2. Turn the knob for the gas control to set the
necessary heat setting.
Control the flame trough the holes in the bottom
of the oven.
Using the grill
Oven safety device:
The gas oven has a thermocouple. It
stops the gas flow if the flame goes
out.
1. Open the oven door.
2. Press the knob for the gas control and turn
it to . Keep the knob for the gas control
pushed for 15 seconds or less.
Do not release the knob until the flame
comes on.
If the grill burner does not come
on or if it accidentally goes out,
release the knob for the gas
control and turn it to the Off
position. Leave the oven door
open. After one minute, try to
light the grill again.
3. Release the knob for the gas control.
4. Close the oven door.
Turn the knob for the timer as far as it goes,
then turn it to necessary time period.
After the time period is completed, an acoustic
signal sounds.
7