Bernina Bernette Rome 8 Instruction Manual page 67

66 Special Functions
memory scroll mode
stitch parameter edit mode
1st memory location
Switching between memory scroll and
parameter edit mode
In memory mode the stitch width adjustment
buttons serve two purposes: the stitch width
adjustment as well as to navigate between
the different memory locations.
Please observe the memory scroll arrows on
the LCD screen:
- Arrows activated "
scroll mode
- No arrows " " - stitch parameter edit
mode.
Press the enter parameter button to switch
between the two modes.
Recalling and sewing the memorized pattern
Press the memory button to enter the
memory mode, the screen shows the 1st
memory location.
(*Active memory location blinking)
Press the start/stop button or step on the
foot controller to start the sewing.
The blinking memory location on the LCD
screen will move along with the sequential
pattern while sewing.
Please Note:
- If the screen stays in an empty memory
location, the machine will start sewing from
the 1st pattern.
- If the screen stays in a specific location,
the machine will start sewing from that
pattern.
Press the memory button to leave the
memory mode and return to the last selected
pattern group.
" - memory