Bernina Bernette Rome 8 Instruction Manual page 28

Operating Instructions
Reverse button
Reverse is pressed to sew in reverse.
An arrow " " on the LCD display indicates
reverse sewing.
Only the pattern 01-05 and 24 can be
in reverse.
The machine will permanently sew in reverse.
Press the button again to sew forward.
If you press and release the button before
starting to sew, the machine will permanently
sew in reverse and press the button again to
sew forward.
Setup button
Press the setup button to open setup
program and change your sewing setting
(mirror, elongation, twin needle, and sound
function) and get sewing help on the screen.
See chapter special functions details about
the use of this button.
Memory button
Press the memory button to enter memory
mode and store combinations of characters
and/or decorative stitches.
Press the memory button again to leave the
memory mode and return direct mode.
Please note
The pattern 10, 45-55 cannot be memorized.
Enter parameter button
In memory mode press this button to
memorize or edit a pattern.
Patterns in the memory can be edited to
adjust their parameters such as stitch length,
stitch width, mirror, elongation.
See chapter special functions for details
about the use of this button.
27
sewn