Delay start
There are three ways of starting the
programme by means of delaying the
start. You can set the start time or the
finish time of a programme. You also
have the option of taking advantage of
time variable economy rates of
electricity using the
SmartStart
function.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary. If the compartment is
wet, powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully
dispensed.
Do not use liquid detergent when
selecting Delay start, as it can run
into the dishwasher before it is
required.
Open the door.
Switch the dishwasher on using the
sensor.
Select the programme you want from
the main menu.
Press the sensor.
The indicator light comes on.
EcoStart
or
Programme options
You then have a choice of the
Finish at
and
EcoStart
functions.
Select the function you want.
Now enter the required time.
If, while you are setting the time, you do
not press any sensors for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If you keep the relevant arrow
sensor pressed, the value shown
will automatically increase or decrease.
Start at
,
or
SmartStart
61