Add Salt Reminder - Miele G 6994 Operating Instructions Manual

Before using for the first time

Add salt reminder

 Fill the salt reservoir with dishwasher
salt for reactivation when

Insufficient salt
display (If it appears during a
programme, wait until the end of the
programme).
 Confirm with OK.
The message will go out.

Risk of corrosion!
Immediately after filling the salt
reservoir, run the
programme with the
programme option selected and
without any crockery in the
dishwasher to remove any traces of
salt from the cabinet.
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. If this is
the case, confirm again with OK.
The refill reminder will be switched off if
you have programmed the dishwasher
for a water hardness below 0.9 mmol/l
(5 °d - German scale).
28
appears in the
QuickPowerWash
Short
If you only ever use multi-function
combination products in your
dishwasher, you can switch off both
refill reminders for salt and rinse aid if
you wish (see "Settings menu -
Switching off the refill reminders").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
switch the reminders back on.