Settings menu
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
The dosage can turn out to be higher
than the set value due to the automatic
adjustment of the
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Use the arrow sensors to set the
level you want and confirm with
100
Automatic
programme.
OK
Consumption (EcoFeedback)
You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the
total energy and water used in all
previous dishwasher programmes (see
"Caring for the environment -
EcoFeedback consumption indicator").
Consumption indicator
Select the
Select the setting you want and
confirm with
.
Total consumption
You can display the values for
and
Water
.
Select the
You can also reset the values for the
total consumption to 0.
Select the
Select the
Confirm the message with
The values are now reset to 0.
Display consumption
.
OK
Total consumption
Reset
option.
Yes
option.
OK
option.
Energy
option.
.