Control Unit Operation - Adkins Beta Swift Operator's Manual

5.2 Operation Of Control Unit, Setting Time and Temperature
(The head must always be in the up position before the controller is set)
ACT ACT
ACT ACT
TEMP TEMP
SET SET
TIME TIME
TEMP TEMP
SET SET
TIME TIME
Setting Temperature
1. Switch on Press;
'TEMP' indicator will light up.
2. Press 'MODE' button to select 'Set'
on indicator.
3. The Display will start flashing.
4. Use the 'UP' and 'DOWN' arrow
buttons to
temperature.
5. When you have set the required
temperature the Display will stop
flashing and the 'SET' indicator will
go out.
6. Press the 'ON/OFF' button to start
the Press heating to the selected
temperature. The 'ACT' indicator will
light up.
Setting Time
1. Switch on Press;
'TEMP' indicator will light up.
2. Press 'MODE' button twice to select
'SET' and 'TIME' on indicator.
3. The display will start to flash.
4. Use the 'UP' and 'DOWN' arrow
buttons to set the required time.
5. When you have
required time the Display will stop
flashing and the 'SET' and 'TIME'
indicators will go out.
6. Press the 'ON/OFF' button to start
the Press. The 'ACT' indicator will
light up.
Display and
set the required
Display and
selected the
Page 13