Driving On Slippery Surfaces - Polaris Scrambler 1000 Owner's Manual

OPERATION

Driving on Slippery Surfaces

Whenever driving on slippery or loose surfaces such as wet trails,
gravel, snow or ice, follow these precautions:
1. Slow down when entering slippery areas.
2. Engage 4X4 before wheels begin to lose traction.
NOTICE: Severe damage to drive train may occur if the 4X4 is engaged while
the wheels are spinning. Allow the rear wheels to stop spinning
before engaging 4X4, or engage 4X4 before wheels begin to lose
traction.
3. Be alert. Watch the trail. Avoid quick, sharp turns
4. Never apply the brakes during a skid. Correct a skid by turning the
handlebars in the direction of the skid and shifting your body
weight forward.
Always follow the procedures outlined in this
manual for operating on slippery or loose
surfaces. Use extra caution. Always avoid
skidding or sliding.
70
Sideways
Turn in direction
Skid
of skid