Polaris Scrambler 1000 Owner's Manual page 55

FEATURES AND CONTROLS
Instrument Cluster
Indicator Lamps
Lamp
1 Check Engine
2 EPS Warning
(if equipped)
3 Engine Hot
4 Neutral
5 Helmet/Seat Belt
6 High Beam
7 Chassis Fault
8 Performance
Limited
54
Indicates
This indicator appears if an EFI related fault occurs.
Do not operate the vehicle if this warning appears.
Serious engine damage could result. Your autho-
rized POLARIS dealer can assist.
This indicator illuminates when a fault has occurred
in the EPS system. Your authorized POLARIS
dealer can assist. EPS operation is possible with
key on/engine off for up to 5 minutes.
This lamp illuminates to indicate an overheated
engine. If the indicator flashes, a severe overheating
condition exists.
This lamp when the transmission is in neutral and
the ignition key is on the ON position.
This lamp flashes for several seconds when the key
is turned to the ON position. The lamp is a reminder
to wear helmet and seat belt before operating.
This lamp illuminates when the headlamp switch is
set to high beam.
Not applicable.
Not applicable.
Condition