Polaris Scrambler 1000 Owner's Manual page 44

FEATURES AND CONTROLS
All Wheel Drive System
4WDC AWD Mode (if equipped)
Move the momentary switch to the right,
E F
RPM
past the AWD setting, to engage 4WDC (if
equipped). When the switch is on 4WDC,
the ADC system allows engine braking to
:
88 88
all four wheels when the vehicle descends a
hill or incline. Always move the 4X4
switch to 4WDC before ascending or descending a hill.
Four-Wheel Descent Control (4WDC) System
The 4WDC system allows engine braking to all four wheels when the
vehicle descends a hill or incline. Always move the 4X4 switch to
4WDC before ascending or descending a hill.
Engaging Four-Wheel Descent Control
The 4WDC system will automatically engage when all four of the
following conditions occur:
• The 4X4 switch must be in the 4WDC position
• The throttle must be closed (throttle lever released)
• The transmission must be in gear (high, low or reverse)
Disengaging Four-Wheel Descent Control
The 4WDC system will automatically disengage if at least one of the
following conditions occur:
• The 4X4 switch is moved out of the 4WDC position
• The throttle is open (throttle is applied)
• The transmission is shifted to neutral or park
• The vehicle is on flat ground, or not actively descending a hill
43