Polaris Scrambler 1000 Owner's Manual page 29

FEATURES AND CONTROLS
Switches
Sportsman Zugmachine Switches
Engine Stop Switch
The engine will not start or run when the
switch is in the OFF position.
OFF
RUN
Headlight and Momentary High Beam
Switch
The lights do not operate unless the main
key switch is on and the engine stop switch
is in the RUN position.
High Beam
Low Beam
Press this switch with your left forefinger to activate the headlight high
beam. The lights will return to low beam when the switch is released.
Turn Signal Switch
Push the toggle switch either left or right to activate the
corresponding turn signal light. The indicator on the pod will also
flash. Return the toggle to the center position to end the signal.
Horn Switch
Press the horn switch to sound the horn.
Hazard Warning Switch
Push the hazard warning switch to cause all turn signal lights to
flash simultaneously. Use this feature to alert others of an emergency or
other situation requiring caution.
Override Switch
See page 33.
28
Headlight and
Momentary
High Beam
Switch
Override
Switch
Horn
Switch
Engine
Stop
Switch
Hazard
Switch
Turn
Signal
Switch