Tire Tread Depth; Front Wheel Hub Tightening; Wheel Removal - Polaris Scrambler 1000 Owner's Manual

MAINTENANCE
Tires
Operating your vehicle with worn tires, improperly inflated tires, non-standard
tires or improperly installed tires will affect vehicle handling and could cause an
accident resulting in serious injury or death. Always follow all tire maintenance
procedures as outlined in this manual and on the labels on the vehicle. Always
use original equipment size and type when replacing tires.
Refer to the specifications section beginning on page 148 for
recommended tire type, size and pressure.

Tire Tread Depth

Always replace tires
1/8" (3 mm)
when tread depth is
worn to 1/8" (3 mm)
or less.

Front Wheel Hub Tightening

Front wheel bearing tightness and spindle nut retention are critical
component operations. All service must be performed by your
authorized POLARIS dealer.

Wheel Removal

1. Stop the engine.
2. Place the transmission in PARK.
3. Loosen the wheel nuts slightly.
Do not service axle nuts that have a cotter pin installed. See your POLARIS
dealer.
4. Elevate the side of the vehicle by placing a suitable stand under the
footrest frame.
5. Remove the wheel nuts.
6. Remove the wheel.
117