Table of Contents
Advertisement
20
www.electrolux.com
Saving a programme
1. Activate the appliance.
2. Set a heating function in the menu:
Auto Cooking.
3. Touch
display shows: SAVE.
4. Press
The display shows the first free memory
position.
5. Press
6. Enter the name of the programme.
The first letter flashes.
7. Touch
8. Press
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold
You can overwrite a memory position.
When the display shows the first free
memory position, touch
press
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.
Activating the programme
1. Activate the appliance.
2. Select the menu: Favourites.
3. Press
4. Select your favourite programme
name.
5. Press
Press
to go directly to menu:
Favourites.
10.2 Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
If the Pyrolysis function
operates, the door locks
automatically.
A message comes on in the
display when you touch a
sensor field.
1. Activate the appliance.
again and again until the
to confirm.
to confirm.
or
to change the letter.
.
to save.
or
to overwrite an existing
to confirm.
to confirm.
2. Touch
3. Touch
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.
10.3 Function Lock
This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press
display shows: Function Lock.
4. Press
If the Pyrolysis function
operates, the door is locked
and the symbol of a key
comes on in the display.
and
To deactivate the function, press
display shows a message. Press
again and then
When you deactivate the
appliance, the function also
deactivates.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Activate the appliance.
2. Set a heating function.
3. Press
display shows: Duration.
4. Set the time.
5. Press
display shows: Set + Go.
6. Press
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
.
and
at the same time
again and again until the
to confirm.
to confirm.
again and again until the
again and again until the
to confirm.
. The
) to start
Advertisement
Table of Contents
