Table of Contents
Advertisement
Asystems Virtual Webcam Emulation Setup Guide
Webcam Emulation
In an age where everyday people are allowed to host their own channels talking about anything and everything of their
interests by streaming videos live, a virtual webcam emulation has become an essential feature of compact video switchers.
With Asystems' diverse video switchers, we grant user the ability to stream and broadcast video live via RJ-45 connector.
When webcam emulation is established, user is able to use all streaming programs and services to stream and broadcast
live recording through the internet with ease.
Please refer to the following steps to begin webcam emulation setup procedures.
1.
Connect the computer to the RJ45 Video
Streaming connector in the back of the panel.
2.
Turn off the private firewall & antivirus software
Open the Control Panel on your computer
●
Then open the Windows Firewall
●
Select Turn Windows Firewall on or off
●
Turn off the firewall within the Private network
●
settings while leaving the Public network settings
turned on
Turn off your antivirus software for installation to
●
prevent installation being blocked.
Alternatively, you can add the iNETCAM exe
●
as a trusted source and NETCAM.X.86 AX and
NETCAM.X.64.AX to the exception list.
3.
Set up virtual webcam's IP address by automatic
detection method (DHCP).
4.
Auto IP address
Connect both video switcher's streaming output
●
and broadcasting PC's LAN to a DHCP capable IP
network router. (The Dynamic Host Configuration
Protocol (DHCP) is a standardized network
protocol used on Internet Protocol (IP) networks
for dynamically distributing network configuration
parameters, such as IP addresses for interfaces
and services.)
In the SYSTEM STATUS menu of the video
●
switcher, make sure the DHCP is set to ON
(Default at ON), when done so correctly, the IP
address will be displayed.
5.
Download the NETCAM pack on Asystems' website
under the Download page (http://www.asystems-
sys.com/en/help/downloads/).
First unzip the file and click "Yes" to install the
●
iNETCAM.exe executable file.
The InstallShield Wizard window will pop up, click
●
"Next" to begin the CODECS installation.
35
AV500HD
English
Advertisement
Table of Contents
