A SYSTEMS AV500HD User Manual page 14

AV500HD
PVW
a. PVW Label
4
b. CH Label
c. PVW Audio label&meter
d. MIC label & meter
Audio
a. Audio Input Select
5
b. AUX Output Level
c. PGM audio bus
d. Headphone audio bus
English
Fig. 4-1 PVW Out Full Screen
Fig. 4a-1 PVW Label
Fig. 4b-1 PVW Channel
Fig. 4c-1 PVW Audio Source and Meter
Fig. 4d-1 MIC 1-4 Level Meters
Fig. 5-1 Audio Setup
Fig. 5a-1 Crosspoint Channel Audio Input
Source Selects
Fig. 5b-1 AUX Output Level Adjust and meter
Fig. 5c-1 PGM Audio Bus Selects
Fig. 5d-1 Headphone Audio Bus
12
PVW Screen
Crosspoint channel of PVW
PVW audio source and label
MIC inputs are not tied to channel; it will be directly
mixed into PGM.
Audio Setup Screen
1. AV: Original audio source from HDMI/SDI
2. Line: External audio source
3. Tab directly to screen to select audio source for each
channel; selected button will change to blue.
1. Tab directly to start AUX Output Level adjustment
(Button change to blue when active)
2. Rotate SEL knob to make adjustment.
1. Tab directly to start PGM audio bus selection (Button
change to blue when active).
2. Tab PGM again toggle between Main and AUX (or
use SEL knob to select).
Same as PGM audio bus select.
Selects