Monitor Select - A SYSTEMS AV500HD User Manual

AV500HD

MONITOR SELECT

Item
HDMI
a. PGM Label
b. PVW Label
c. CH Label
d. Audio label&meter
e. MIC label& meter
1
f. PGM Out Display
g. PVW Out Display
English
Illustration
Fig. 1-1 Main Multiview Screen
Fig. 1-1 Main Multiview Screen
Fig 1f-2 PGM Out at custom location and size.
Fig. 1g-1 PGM Out starting location
Fig 1g-2 PGM Out at custom location and size.
10
Comments
Multiview Screen
Current PGM channel; red frame around PGM multiview
screen.
Current PVW channel; green frame around PVW
multiview screen.
Crosspoint channel label
Current audio source and label
MIC inputs are not tied to channel; it will be directly
mixed into PGM.
1. Double tap on PGM multiview screen will open PGM
out screen (Default starting position at right center);
PGM Out has red frame.
2. When PGM is open; use joystick to place PGM out
location.
3. Use Size knob to adjust PGM Out screen size.
4. Double tap on PGM Out screen area to close PGM
Out.
Note: PGM Out and PVW Out will share the same
positon and size data; when PGM Out or PVW Out is
closed, the last position and size data will be retained
(Until it is reset).
1. Double tap on PVW multiview screen will open PVW
Out screen (Default starting position at right center);
PVW Out has green frame.
2. When PVW is open; use joystick to place PVW out
location.
3. Use Size knob to adjust PVW Out screen size.
4. Double tap on PVW Out screen area to close PVW
Out.
Note: PGM Out and PVW Out will share the same
positon and size data; when PGM Out or PVW Out is
closed, the last position and size data will be retained
(Until it is reset).