A SYSTEMS AV500HD User Manual page 4

AV500HD
Maintenance
For everyday cleaning wipe the unit with a soft,
●
dry cloth or one that has been slightly dampened
with water. To remove stubborn dirt, use a cloth
impregnated with a mild, non-abrasive detergent.
Afterwards, be sure to wipe the unit thoroughly
with a soft, dry cloth.
Never use benzene, thinners, alcohol or solvents
●
of any kind, to avoid the possibility of discoloration
and/or deformation.
Additional Precautions
This unit allows you to switch images or turn video
●
effects on/off at high speed. For some people,
viewing such images
nausea, or other discomfort. Do not use this unit to
create video that might cause these types of health
problems. Asystems will accept no responsibility
for any such health problems that may occur in
yourself or in viewers.
Unfortunately, it may be impossible to restore
●
the contents of data that was stored in the unit's
memory or SD card once it has been lost.
Asystems assumes no liability concerning such loss of
data.
Use a reasonable amount of care when using the
●
unit's buttons, sliders, or other controls; and when
using its jacks and connectors. Rough handling
can lead to malfunctions.
When disconnecting all cables, grasp the connector
●
itself - never pull on the cable. This way you will
avoid causing shorts, or damage to the cable's
internal elements.
A small amount of heat will radiate from the unit
●
during normal operation.
When you need to transport the unit, package
●
it in the box (including padding) that it came
in, if possible. Otherwise, you will need to use
equivalent packaging materials.
English
can cause headache,
Before Using SD Card
Carefully insert the SD card all the way in---until it
●
is firmly in place.
Never touch the terminals of the SD card. Also,
●
avoid getting the terminals dirty.
The SD cards are constructed using precision
●
components; handle the cards carefully, paying
particular note to the following.
To prevent damage to the cards from static
●
electricity, be sure to discharge any static electricity
from your own body before handling the cards.
Do not touch or allow metal to come into contact
●
with the contact portion of the cards.
Do not bend, drop, or subject cards to strong shock
●
or vibration.
Do not keep cards in direct sunlight, in closed
●
vehicles, or other such locations.
Do not allow cards to become wet.
●
Do not disassemble or modify the cards.
●
2