Switching Off The Machine - SAB JOLLY PRESTIGE 1GR User Manual

SV JOLLY.pdf 1 20/10/2014
Setting of coffee and hot water portions
Programming is done on standby machine ready to operate.
Programming begins pressing the key E on the touch pad on left side of the machine from operator
side.
a. Press key E on the touch pad for more than 5 seconds.
b. Release key E and press the key to be programmed (A B C D F ). The led on the key lights on
and erogation begins.
c. When the wished quantity is reached (coffee or hot water) press the lighted key and the erogation
stops.
d. Repeat the sequence from a to c on every single key of the touch pad on left side of the machine
from operator side.
e. To exit from programming press key "E".
Note: By programming the touch pad on left side of the machine from operator side, the same
quantities are automatically set on the second touch pad as far as coffee is concerned. Hot water
portions are to be set on every group.
If you want to program the other touch pad with different quantities, it is necessary to repeat the
programming sequence pressing the key E on the second touch pad.
For the perfect programming of coffee we suggest you to prepare a coffee using fresh and duly grinded
coffee to be put in the cup that will be used during regular operation.

Switching off the machine

Turn the general switch (fi g.1,4) from position 2 to position 0.
Note: If the espresso machine Jolly is not used for a longer time, it has to be switched off, disconnected
from electrical supply and water mains. The boiler must be completely emptied. The machines has to
be carefully drained and stored in a dry location which is inaccessible to minors.
The machine must be dismantled by an authorized technician according local law and
jurisdiction.
12:43 pm
User Manual - Jolly Prestige
2014 – Page 9
Specifications subject to change without notice