Table of Contents
Advertisement
Search for devices
Pair
Connect
Connecting and disconnecting a paired Bluetooth wireless
technology headset
Once you have added a Bluetooth wireless technology headset, the
headset automatically connects to the DECT Handset when the two
devices are active, and are in range of each other. The DECT Handset
disconnects the Bluetooth wireless technology headset if the handset is
inactive or out-of-range.
To manually connect or disconnect a Bluetooth wireless technology
handset, perform the following steps:
Bluetooth
4. Press the
Up
option.
for devices
Attention: If the search process is successful,
proceed to step 5. If the search is unsuccessful,
repeat steps 3 to 4.
5. Press the
Pair
6. Use the
Dialpad
Bluetooth wireless technology headset (see the
headset documentation).
7. Press the
Connect
8. Press the
Clr
idle display.
1. Open the
Bluetooth
steps in
"Accessing the Bluetooth wireless
technology configuration menu" (page
Handset accessories
or
key to highlight the
Down
soft key and add the headset.
to enter the PIN code of your
soft key to connect the device.
key one or more times to return to the
configuration menu using the
Search
238).
241
Advertisement
Table of Contents
