Rhaon ICL-R User Manual page 7

Assembly
5.
into the channels as shown.
exception. The woofer sections of the second and third modules should be joined together. If in doubt, refer to page 62 for proper module
orientation.
Do not attempt to mount a stacked ICL-R array onto a subwoofer standing vertically. The resulting assembly is unstable.
Master / Slave Settings
The next step is to electrically link the modules together and verify
connections should be made to the Master module.
Plug one end of the short CAT5 linking cable into the lower intercon-
upper socket on the upper module. Then plug one end of the short
AC power cable into the looping power socket on the lower module
and the other end into the power socket on the upper module. Follow
the same procedure to connect a third module, if one is provided.
The next step is to set the two dip switches that identify each module.
dip switches shows the proper setting for a Master module (both
future use.
switches, you will need to turn it off or disconnect it at the source and
then reconnect it before the dip switch settings will take effect. When
properly set the digital readouts will both read 20 in a dual array and
30 in a three module array.
IC Live Users Manual - Models ICL-R & IC215S-R
6. Lock the joining bars into place
with the short Quik-Release pins to
complete the physical assembly.
Master
7