Servicing / Trouble Shooting Hints - Rhaon ICL-R User Manual

IC Live Users Manual - Models ICL-R & IC215S-R
SERVICING and TROUBLE SHOOTING
GENERAL INFORMATION
-
nel.
transducers can be replaced from the front of the column by removing the grille to expose the transducers and their mounting screws.
can easily be taken out and replaced from the rear.
TROUBLE SHOOTING HINTS
GENERAL
Your Iconyx array was factory tested before it left our factory and barring shipping damage should be in perfect operating condition.
If you should run into a problem at the site, it's good to know the problem is in the network or the system wiring and not in the loudspeak-
ers.
The Analog 1 input is always connected so it's a simple matter to connect a line level analog signal to an array and check out its perfor-
mance.
COMMON AUDIO PROBLEMS
Hum
The most common sources of system hum are the program source or an improper or poor ground on an audio signal line. Check the pro-
gram source to make sure the hum isn't originating there. Carefully check all the audio connections to make sure they are properly made.
Noise
Most noise problems are the result of improper grounding or of noise being induced into the audio signal line from adjacent noise sources,
and turn off all the lights and any other suspected noise sources.
54