Rhaon ICL-R User Manual page 36

IC Live Users Manual - Models ICL-R & IC215S-R
-
ther speed the design process. It's called Auto-Focus and it is available
as a design aid whenever you choose to use 2 or more beams. You'll
Clicking on Auto-Focus will open the setup window shown to the right.
on OK and the program will automatically determine for you the best
focus point for each of the beams.
Auto-Focus will also warn you if the location you have chosen for the
steerable array isn't ideal.
You can override this warning if you want and the program will still
attempt to properly focus all the beams. You may, however, want to try
the Iconyx array or use more or fewer beams to see it you can eliminate
this warning prompt.
chosen.
A center frequency of 1000 Hz was selected for a 1/3 octave, A-weighted simulation.
36