Table of Contents
Advertisement
IC Live Users Manual - Models ICL-R & IC215S-R
that the correct measurement system is
measurement system is feet but you
may want to use meters.
To check or change the setting, select
Preferences from the Options pull down
or right click in the center of the beam
steering window.
If you want to change from feet to me-
ters, check the Metric radio button.
control the behavior of the Fault Relay
and the Power-On sequencing delay.
setting controls for the appearance of
default setting are shown.
allows you to change the height of the
you are more familiar with the program
we suggest you accept the default set-
ting. There are times, however, when
you will want to change the height of
the measuring plane. It is set to 1.2
seated audience, but not for a standing
audience.
The Mapping Appearance section
allows you to control the appearance
of the main Mapping plot. For now, we
suggest using the default settings. You
can experiment with various settings
later.
you control over the scales used in the
main Mapping window. Many expe-
rienced users like to use the Fixed
-
periment with this to see which settings
you like best.
We'll investigate the other tabs later.
32
Advertisement
Table of Contents
