Clearing The Document Path - Kodak 9500 User Maintenance Manual

Clearing the
document path
The document path
A-61092 September 1999
If a document becomes lodged in the scanner transport system, the
system stops running and a message appears in the status display.
A document can become lodged in the transport system when:
•
Documents are not fed straight (skewed).
•
Documents are torn, badly folded, or wrinkled.
•
Staples and paper clips were not removed from documents.
•
Imaging guides are not seated properly or are not installed.
•
Transport system baffle plates are not firmly closed.
The document path can be cleared easily because:
•
No tools are needed.
•
Easy-access panels let you quickly locate and clear documents.
There are six areas in the transport system where documents may
become lodged and need to be removed:
F
A
B
A The feeder/horizontal transport area
B The imaging guide area
C The lower roller assembly area
D The vertical transport area
E The upper turn area
F The document exit area
E
D
C
7-3