Clearing The Paper Path; Lowering The Elevator; Toggle Counter - Kodak i5x50 User Manual

Clearing the Paper Path

Lowering the Elevator

Toggle Counter

A-61845 January 2016
When the Ready screen is displayed, you can do the following:
• Clear Path — clears the scanner transport of any documents.
• Lower Elevator — lowers the input elevator to the lowest position.
• Rear Exit — allows you to open or close the rear exit.
• Operator Log — provides error code information, such as the time the error
occurred, the error code and a brief description of the error.
• Information — provides scanner information, such as scanner model,
firmware version, etc.
• Diagnostics — allows you to view Scan History, check the Maintenance
Meters, run a Print Test, run a scanner Self Test, put the scanner in Count
Only mode, run a Patch Test and a Patch Reader Test, perform a UDDS
(ultrasonic) calibration, perform a Touchscreen calibration and access
Alterations. Alterations is for Kodak Alaris Technical Support only.
• Settings — allows you to access a variety of scanner settings. These
settings are set infrequently. For more information, see the section entitled,
"Settings" later in this chapter.
NOTE: If the User counter is set to On (see "User counter" later in this
chapter) the Reset User Counter and Toggle Document Counter
will also be displayed on the Ready screen. These options allow you to
select which counter value is being displayed as well as reset the
value of the User counter (the Toggle Document Counter must be
reset by the scanning application).
Touch Clear Path to allow the scanner to eject any documents that are left in
the transport.
Use this option whenever you need to make additional room in the input
elevator for adding documents to the stack. The input elevator will descend to
the lowest position (750-sheet) when you touch Lower Elevator.
Toggle Counter will only be displayed on the Ready screen if the User Counter
or Batch Counter is set to On. When this option is selected, the scanner will
toggle between User Counter and Document Counter values in the status
area. For more information, see the section entitled, "User Counter" later in this
chapter.
3-15