Spare Parts - PICO Lasermax Installation Manual

CLEANING
WARNING:
Make sure the pistol is unloaded. If not, unload it following
the "UNLOADING" instructions in this manual (pages 22-23).
Over time, your laser or light lens could become clouded with powder
residue. In order to remove this residue:
Keep firearm pointed in a safe direction. Confirm laser or light is off.
Take a standard cotton swab and dampen end with
isopropyl alcohol.
Apply dampened swab to the laser or light lens and rotate in a small
circular pattern removing any residue. Be sure to clean around the
edges of the lens.
For best results, it is recommended that the laser or light lens be
cleaned along with your firearm after each use.

SPARE PARTS

LMS-AT50
LMS-2x13N
LMS-CR2
For patent information, please visit:
www.lasermax.com/sevice/patents.aspx.
01785-0-54
5/14
Adjustment tool (for laser)
1/3N battery (2 pack for laser)
CR2 battery (for light)
57