Screensaver; Ftp Acess Data - Siemens HiPath 8000 Administrator's Manual

administration.fm
Administration
Transferring Phone Software, Application and Media Files
3.8.8

Screensaver

The screensaver is displayed when the phone is in idle mode. It performs a slide show consist-
ing of images which can be uploaded using the web interface. The accepted data format is
JPEG. The images are resized to fit in the screen, which implies that images with a width/height
ratio differing from 4:3 will appear with deviant proportions. The resolution of the OpenStage
80 is 640x480, the OpenStage 60 has 320x240.
3.8.8.1

FTP Acess Data

If the default FTP access settings (see Section 3.8.2, "Common FTP Settings") are to be used,
Use default must be set to „Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP access settings shall be used.
Value range: „Yes", „No".
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: „FTP", „HTTPS".
• Server: IP address or hostname of the FTP/HTTPS server in use.
• Port: Port number of the FTP/HTTPS server in use.
• Account: Account at the server (if applicable).
• Username: User name for accessing the server.
• Password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to „HTTPS".
Administration via WBM
File transfer > Screensaver
3-76
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual