Intel XL710-Q2 User Manual page 82

Intel Boot Agent the problem.
cannot con-
tinue.
PXE-E01: PCI Image vendor and device ID do not match those located on the card. Make sure the
Vendor and correct flash image is installed on the adapter.
Device IDs do
not match!
PXE-E04: Error PCI configuration space could not be read. Machine is probably not PCI compliant.
reading PCI con- The Intel Boot Agent was unable to read one or more of the adapter's PCI con-
figuration figuration registers. The adapter may be mis-configured, or the wrong Intel Boot
space. The Intel Agent image may be installed on the adapter. The Intel Boot Agent will return control
Boot Agent can- to the BIOSand not attempt to remote boot. Try to update the flash image. If this
not continue. does not solve the problem, contact your system administrator or
Support.
PXE-E05: The The adapter's EEPROM is corrupted. The Intel Boot Agent determined that the
LAN adapter's adapter EEPROM checksum is incorrect. The agent will return control to the BIOS
configuration is and not attempt to remote boot. Try to update the flash image. If this does not solve
corrupted or has the problem, contact your system administrator or
not been
initialized. The
Intel Boot Agent
cannot con-
tinue.
PXE-E06: The system BIOS does not support DDIM. The BIOS does not support the mapping
Option ROM of the PCI expansion ROMs into upper memory as required by the PCI spe-
requires DDIM cification. The Intel Boot Agent cannot function in this system. The Intel Boot Agent
support. returns control to the BIOS and does not attempt to remote boot. You may be able to
resolve the problem by updating the BIOS on your system. If updating your sys-
tem's BIOS does not fix the problem, contact your system administrator or your
computer vendor's customer support to resolve the problem.
PXE-E07: PCI BIOS-level PCI services not available. Machine is probably not PCI compliant.
BIOS calls not
supported.
PXE-E09: Unex- The UNDI loader returned an unknown error status. xx is the status returned.
pected UNDI
loader error.
Status == xx
PXE-E20: BIOS could not move the image into extended memory.
BIOS extended
memory copy
Intel Customer
Intel Customer Support.