Intel XL710-Q2 User Manual page 132

Ethernet adapters and devices
Hide thumbs Also See for XL710-Q2:
Table of Contents

Advertisement

The PRO/100+ Dual Port Server adapter (with three LEDs per port) has the following indicator lights:
The Intel® PRO/100 S Dual Port Server adapter (with 64 bit PCI Connector) has the following indicator
lights:
Indication
Label
 LNK
On
Off
 ACT
On or flash-
ing
Off
 100
On
Off
Label
Indication
 ACT/LNK
On
Off
Flashing
 100TX
On
Off
Meaning
The adapter and switch are receiving power; the
cable connection between the switch and adapter is
good.
The adapter and switch are not receiving power; the
cable connection between the switch and adapter is
faulty; or you have a driver configuration problem.
The adapter is sending or receiving network data. The
frequency of the flashes varies with the amount of net-
work traffic.
The adapter is not sending or receiving network data.
Operating at 100 Mbps.
Operating at 10 Mbps.
Meaning
The adapter and switch are receiving power; the
cable connection between the switch and adapter is
good.
NOTE: if only one port appears to be operating, go
into the Network control panel (Windows) or a
configuration file for other operating system, and
check the status of the second port.
The adapter and switch are not receiving power, or
you have a driver configuration problem.
The adapter is sending or receiving network data.
The frequency of the flashes varies with the amount
of network traffic.
Operating at 100 Mbps.
Operating at 10 Mbps.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents