Quidway S5012G-DC Installation Manual page 33

Installation Manual
Quidway S5000 Series Ethernet Switches
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Step 2: Press <3> in the loading menu, choosing to download the BootROM program
using XModem. Press <Enter>. The system displays the following download speed
setting menu:
Please select your download baudrate:
1. 9600
2. 19200
3. 38400
4. 57600
5. 115200*
0. Return
Enter your choice (0-5):5
Step 3: Choose an appropriate download baud rate. Press <5> in the above example to
choose the baud rate of 115200bit/s. Press <Enter>. The system displays the following
information:
Are you sure to update your bootrom?(Y/N)
Step 4: The system begins to download if you press <Y>; it returns to download menu if
you press <N>. If you press <Y> and <Enter>, the system displays the following
information:
Download baudrate is 115200 bps.
Please change the terminal's baudrate to 115200 bps and select XMODEM protocol.
Press enter key when ready.
Note:
You do not need to modify the HyperTerminal's baud rate if you have chosen 9600 bps,
and thus can skip Steps 5 and 6 and proceed to Step 7 directly. At this time, the system
will not display the above information.
Step 5: Enter HyperTerminal's [File/Properties] menu, click <Configuration> in the
popup dialog box, select the baud rate of 115200bps in the "Console Port
Configuration" dialog box.
Chapter 5 BootROM and Host Software Loading
Huawei Technologies Proprietary
5-4