Table of Contents
Advertisement
Installation Manual
Quidway S5000 Series Ethernet Switches
3)
Click <OK> after the serial port is selected and the following interface will pop up.
Set the baud rate to 9600, data bit to 8, parity to none, stop bit to 1, and flow
control to none.
Figure 4-4 Setting serial port parameters
4)
Click <OK> when the serial port parameters are set and the system will enter the
following interface.
Chapter 4 Powering on Switch for the First Time
Huawei Technologies Proprietary
4-3
Hide quick links:
Advertisement
Table of Contents
