Table of Contents
Advertisement
Installation Manual
Quidway S5000 Series Ethernet Switches
Press Ctrl-B to enter Boot Menu...
Lines (1) through (8) are system test information.
Line (9), which will last for five seconds, is for users to choose whether or not to enter
the BOOT menu.
Press <Ctrl+B> within 5 seconds and enter the BOOT menu.
If you perform no operation or press other keys other than <Ctrl+B> within the 5
seconds of waiting, the system will enter the auto-booting state when the time
prompt for instruction waiting becomes 0.
System auto-booting interface is as follow:
Auto-booting...
Starting ...
User Interface Aux0/0 is available
Press ENTER to get started.
The above information indicates the automatic booting is done.
Press <Enter> and the terminal will display:
<Quidway>
By this time, the user can start configuring the switch.
Note:
Quidway series switches provide diverse command modes. For introduction of the
configuration commands and command line interfaces in detail, refer to Quidway
S5000 Series Ethernet Switches Operation Manual.
The switch MAC is: 00E0-FC4B-6A8E
Huawei Technologies Proprietary
Chapter 4 Powering on Switch for the First Time
(8)
5
(9)
4-6
Hide quick links:
Advertisement
Table of Contents
