D. Operation Panel - Sharp MX-C250 Service Manual

D.Operation panel (USA)
(19)
(18)
(20)
(17)
(21)
No. Name
1 Display
2 [FAX] key / indicator
3 [PROGRAM 1 / PROGRAM 2] key
4 [SCAN] key / indicator
5 [ZOOM] key
6 [COPY] key / indicator
7 [ID CARD COPY] key
8 Arrow keys
9 [OK] key
10 [EXPOSURE] key
11 [ENERGY SAVE] key / indicator
12 [BACK] key
13 [SPECIAL FUNCTION] key
14 [C] key
15 [DUPLEX] key
16 [ADDRESS] key
17 [COMM. SETTING] key
18 [SPEED] key
19 [FAX STATUS] key
20 [SPEAKER] key
21 [REDIAL/PAUSE] key
22 [COLOUR START] key / indicator
23 [BLACK & WHITE START] key /
indicator
24 [LOGOUT] key
25 Numeric keys
26 [READ-END] key
27 [CA] key
28 [STOP] key
29 FAX mode indicators
LINE indicator
DATA indicator
30 Printer mode indicators
ONLINE indicator
DATA indicator
(1) (2) (3) (4) (5) (6) (7) (8)
(24) (25) (26) (27)
(14)
Shows various messages.
This key is used to select fax mode.
Press to use the program settings of the default scanner.
Press to select scan mode.
Press to select a reduction or enlargement copy ratio.
Press to select copy mode. The toner remaining amount is displayed by holding this key.
Enable ID Card Copy.
Press to move the highlighting (which indicates that an item is selected) in the display.
Press to enter the selected setting.
Use to select the exposure mode.
Press to enter the energy save mode.
Press to return the display to the previous screen.
Press to select special functions.
Press to clear the set number of copies or stop a copy run.
Select the duplex copying and the duplex scanning mode.
Used to search for address, numbers and other contact information stored for auto dialling.
This is used to switch between memory transmission and direct transmission, and to switch between automatic
reception and manual reception. It is also used to enter a space or "-" when entering characters.
This is used to dial by Speed dialling and to enter a symbol when entering characters.
This is used to cancel a fax transmission or a stored fax transmission.
This is used to dial without lifting an extension phone connected to the machine and to shift between upper and
lower case when entering characters.
This is used to redial the last number dialled, and enter a pause when entering a fax number.
Press this key to copy or scan an original in colour. This key cannot be used for fax or Internet fax.
Press this key to copy or scan an original in black and white. This key is also used to send a fax in fax mode.
Press this key to log out after you have logged in and used the machine. When using the fax function, this key
can also be pressed to send tone signals on a pulse dial line.
Enter characters/numbers.
When copying in sort mode from the document glass, press this key when you have finished scanning the original
pages and are ready to start copying.
Clears all selected settings and returns the machine to the default settings.
Press this key to stop a copy job or scanning of an original.
Lights up when a fax is being sent or received.
Blinks when a fax cannot be printed because there is no paper. Lights steadily when there is an unsent fax.
Print data cannot be received when this lamp is lit.
Blinks when print data is being received. Lights steadily during printing.
MX-C250 EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 4
(9) (10) (11) (12) (13)
(15)
(28) (29) (30)
Function/Operation
(16)
(22)
(23)