Clock Functions - Zanussi ZOA35676WK User Manual

DISPLAY
A
BUTTONS
Button

CLOCK FUNCTIONS

CLOCK FUNCTIONS TABLE
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
SETTING AND CHANGING THE TIME
You must set the time before you operate the oven.
The flashes when you connect the appliance to
the electrical supply, when there was a power cut
or when the timer is not set.
Press the or to set the correct time.
After approximately five seconds, the flashing stops
and the display shows the time of day you set.
B C
Function
MINUS
CLOCK
PLUS
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the opera-
tion of the appliance. You can set the MINUTE MINDER at any
time, also when the appliance is off.
A. Function indicators
B. Time display
C. Function indicator
Description
To set the time.
To set a clock function.
To set the time.
Application
To change the time of day press
again until starts to flash.
SETTING THE DURATION
1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the DURATION time.
again and
starts to
7