Kickstrip grilles and kickstrip filter
Your refrigerator is fitted with a
kickstrip grille and filter to protect
the internal working components.
We recommend cleaning the
grille and filter in conjunction with
changing your water filter cartridge
(every 6 months).
To maximise operating efficiency,
●
●
keep ventilation openings clear of
obstructions by regularly vacuuming
the flooring in front of your appliance.
More frequent cleaning may be
●
●
necessary for dusty homes or those
with pets shedding hair.
To clean the bottom kickstrip grille
and kickstrip filter:
Remove the air flow divider by
1
pulling towards you (A).
To remove the top kickstrip grille,
2
insert fingers into the left and right
square openings on the grille. Pull
towards you (B).
To remove kickstrip filter, insert
3
fingers into the left and right square
openings on the filter. Pull towards
you (C).
Clean both components with liquid
4
detergent dissolved in warm water
and a soft lint-free cloth.
Rinse with clean water and dry with
5
a clean, lint-free cloth.
To re-install kickstrip filter and
kickstrip grille:
To re-install kickstrip filter, align filter
1
tabs onto the rails and push to the
rear until it clips securely (D).
To re-install top kickstrip grille, align
2
securing hooks then firmly push
grille onto product until it clips
securely (E).
To re-install air flow divider, align the
3
divider underneath the grille tabs
indicator and clip onto the vanes of
the bottom grille (F).
22
CLEANING CARE
Removing air flow divider
Removing top kickstrip grille
C
Removing and replacing kickstrip filter
Replacing top kickstrip grille
Replacing air flow divider
A
B
1.
IF TOEKICK IS HIGHER THAN 4" USE SID
CUT UNREQUIRED VANES FROM DOT
2.
DRILL HOLES THROUGH DIMPLES
3.
USE PROVIDED SCREWS TO FIX GRILL
MATCHING HOLES ON PLASTIC PART
D
E
F