Page 1
King Stock Code: 803/44607 Super King Thank you for purchasing this Charlotte Bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. For product support or spare parts please call the John Lewis Helpline;...
Page 2
Fittings and parts checklist 3.5 x 18mm Screw x 4 M4 Allen Key x 1 M8 Spring Washer x 4 M5 Allen Key x 1 Centre Caps x 15 Nut M8 x 4 Spanner M13 x 1 Side Caps x 30 M6 x 25mm Bolt x 10 Headboard x 1 Footboard x 1...
Page 3
Step by step assembly instructions Step One Hook the pre-attached metal fixings on the Side Rails (3) over the pre-inserted bolts in the Headboard (1) and Footboard (2) and hand-tighten to loosely secure parts together. Do not tighten with M5 Allen Key (B) until you have inserted the Centre Rail in the next step.
Page 4
Step Three Attach Metal Plate (7) and Wooden Leg (6) together as shown in Step 1. Attach together Wooden Leg (6) and Metal Plate (7) using Spring Washer (G) and M8 Nut (H) then tighten with Spanner M13 (I) and Screw 3.5x18mm (F). STEP 1 STEP 2 Spanner M13 (I)
Page 5
Step Four Insert two Slats (4) into both sides of a Centre Cap (C) and press down into the pre-inserted hole in the Centre Rail (5). Insert a Side Cap (D) onto both of the other ends of the slats and press down into the pre-inserted holes in the Side Rails (3).
Page 6
Care and Maintenance This Charlotte Bed should be cleaned using a soft damp cloth and dried immediately. Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently damage the surface.