Thank you for purchasing the CUBE Desk. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Important safety information Warnings The product should only be used on firm, level ground. Keep small parts out of reach of children . Ensure the product is fully assembled as illustrated before use. Do's Check the pack and make sure you have all the parts listed. Check all screws or bolts are tightened and inspect regularly.
Page 4
Your Desk Description Dimension Desk top Left side panel Middle side panel Right side panel Back panel A Bottom Rail Back panel B Front rail Drawer front large Drawer front small Drawer side left large Drawer side right large Drawer side left small Drawer side right small Drawer back large Drawer back small...
Page 8
CUBE Desk 25502 Step 3 Parts, fittings and tools Step 4 Parts, fittings and tools Step 5 Parts, fittings and tools...
Page 9
CUBE Desk 25502 Step 6 Parts, fittings and tools Step 7 Parts, fittings and tools...
Page 10
CUBE Desk 25502 Step 8 Parts, fittings and tools Step 9 Parts, fittings and tools...
Page 11
CUBE Desk 25502 Step 10 Parts, fittings and tools Step 11 Parts, fittings and tools Step 12 Parts, fittings and tools...
Page 12
CUBE Desk 25502 Step 13 Parts, fittings and tools Step 14 Parts, fittings and tools Step 15 Parts, fittings and tools...
Page 13
CUBE Desk 25502 Step 16 Parts, fittings and tools Step 17 Parts, fittings and tools...
Page 14
CUBE Desk 25502 Step 18 Parts, fittings and tools Step 19 Parts, fittings and tools...
Page 15
CUBE Desk 25502 Step 20 Parts, fittings and tools Step 21 Parts, fittings and tools...
Page 16
CUBE Desk 25502 Step 22 Parts, fittings and tools Step 23 Parts, fittings and tools...
Page 17
CUBE Desk 25502 Step 24 Parts, fittings and tools Step 25 Parts, fittings and tools...
Page 18
CUBE Desk 25502 Step 26 Parts, fittings and tools Step 27 Parts, fittings and tools...
Page 19
CUBE Desk 25502 Step 28 Parts, fittings and tools Step 29 - option Optional cover Peel off adhesive paper ring and attach to the inside surface of the drawer handle. Stick firmly. Parts, fittings and tools...
Page 20
CUBE Desk 25502 Step 30 Parts, fittings and tools WARNING Always lift the unit from the base when moving it, do not drag along the ground, as this may damage the legs. It is recommended that two people should move the unit, never move it alone. NEVER DRAG UNIT ALONG ALWAYS LIFT THE UNIT FROM THE GROUND...
CUBE Desk 25502 Step 31 Final assembly Parts, fittings and tools Mark the drill hole positions. Remove the unit and drill a hole for wall plug in the marked positi- ons. Chose correct fixings for your type of wall (see page 21). With help, lift the unit up and aligning the holes, fix to the wall using the correct screws and tig-...
Page 22
A guide to wall mounting and fixings A guide to wall mounting and fixings Warning Serious or fatal crushing injures can occur from furniture tipping over. To prevent this furniture from tipping over it must be permanently fixed to the wall. Wall fixing screws are not included, since different wall materials require different types of screws / fixing.
Page 23
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. Retain these instructions for future reference. John Lewis Partnership 171 Victoria Street London SW1E SNN...