Step Four
Insert two Slats (4) into both sides of a Centre Cap (C) and press down into the pre-inserted hole in the
Centre Rail (5). Insert a Side Cap (D) onto both of the other ends of the slats and press down into the
pre-inserted holes in the Side Rails (3). Repeat this process for all slats.
D
4
x30
4
C
D
Step Five
This bed is now ready to use.
4
C
4
x15
4
C
5/6
4.
Slats (30pcs)
C.
Centre Caps (15pcs)
D.
Side Caps (30pcs)