Thank you for purchasing the CUBE Corner desk. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Important safety information Warnings The product should only be used on firm, level ground. Keep small parts out of reach of children . Ensure the product is fully assembled as illustrated before use. Do's Check the pack and make sure you have all the parts listed. Check all screws or bolts are tightened and inspect regularly.
Page 4
Your Corner desk Description Dimension (mm) Desk top 1370 x 800 x 19 Left side panel 584 x 421 x 19 Right side panel 584 x 421 x 19 Middle side panel 584 x 316 x 19 Shelf 384,5 x 302 x 19 Bottom 385 x 296 x 19 Rail...
Product assembly CUBE Corner desk 25504 Step 1 Parts, fittings and tools Step 2 Parts, fittings and tools...
Page 7
CUBE Corner desk 25504 Step 3 Parts, fittings and tools Step 4 Parts, fittings and tools...
Page 8
CUBE Corner desk 25504 Step 5 Parts, fittings and tools Step 6 Parts, fittings and tools...
Page 9
CUBE Corner desk 25504 Step 7 Parts, fittings and tools Step 8 Parts, fittings and tools...
Page 10
CUBE Corner desk 25504 Step 9 Parts, fittings and tools Step 10 Parts, fittings and tools...
Page 11
CUBE Corner desk 25504 Step 11 Parts, fittings and tools Step 12 Parts, fittings and tools...
Page 12
CUBE Corner desk 25504 Step 13 Parts, fittings and tools Step 14 Parts, fittings and tools Step 15 Parts, fittings and tools...
Page 13
CUBE Corner desk 25504 Step 16 Parts, fittings and tools Step 17 Parts, fittings and tools...
Page 14
CUBE Corner desk 25504 Step 18 Parts, fittings and tools Step 19 Parts, fittings and tools...
Page 15
CUBE Corner desk 25504 Step 20 Parts, fittings and tools Step 21 Parts, fittings and tools...
Page 16
CUBE Corner desk 25504 Step 22 Parts, fittings and tools Step 23 Parts, fittings and tools WARNING Always lift the unit from the base when moving it, do not drag along the ground, as this may damage the legs. It is recommended that two people should move the unit, never move it alone.
CUBE Corner desk 25504 Step 24 Final assembly Parts, fittings and tools Mark the drill hole positions. Remove the unit and drill a hole for wall plug in the marked positions. Chose correct fixings for your type of wall (see page 17). With help, lift the unit up and aligning the holes, fix to the wall using the correct screws and tighten...
Page 18
A guide to wall mounting and fixings A guide to wall mounting and fixings Warning Serious or fatal crushing injures can occur from furniture tipping over. To prevent this furniture from tipping over it must be permanently fixed to the wall. Wall fixing screws are not included, since different wall materials require different types of screws / fixing.
Page 19
Your feedback is very important to us and we would love to hear your comments on your new furniture. Please visit our website to leave a review. Thank you. Retain these instructions for future reference. John Lewis Partnership 171 Victoria Street London SW1E SNN...